【祖传点灯】安信可Ai-M61-32S Arduino 环境测评

板子申请专区 · 2024-5-18 01:55:33

[i=s] 本帖最后由 dja 于 2024-5-18 02:10 编辑 [/i]<br />
<br />

> 最近加班太多..

## 参考

[https://bbs.ai-thinker.com/forum.php](https://bbs.ai-thinker.com/forum.php)

[https://bbs.ai-thinker.com/forum.php?mod=viewthread&tid=44836](https://bbs.ai-thinker.com/forum.php?mod=viewthread&tid=44836)

## 环境

1. 设置自动检测 Proxy

确保网络畅通

![](images/Arduino-Proxy.png)

2. 填入开发板 json 链接

开发板链接：[https://github.com/bouffalolab/arduino-bouffalo/releases/latest/download/package_bouffalolab_index.json](https://github.com/bouffalolab/arduino-bouffalo/releases/latest/download/package_bouffalolab_index.json)

开发板镜像链接：[https://ghproxy.com/github.com/bouffalolab/arduino-bouffalo/releases/latest/download/package_bouffalolab_index.json](https://ghproxy.com/github.com/bouffalolab/arduino-bouffalo/releases/latest/download/package_bouffalolab_index.json)

![](images/BL618-json.png)

3. 查找开发板

关键词：BL618

![](images/BL618-查找.png)

4. install 开发板

由于网络不太稳定，可能需要重复尝试几次才能成功

![](images/BL618-Installing.png)

![](images/BL618-Installed.png)

5. 选择开发板

![](images/BL618-选择.png)

6. 连接开发板端口

## 代码

1. 修改库文件

C:\Users\16062\AppData\Local\Arduino15\packages\bouffalolab\hardware\bouffalolab\1.0.5\cores\bl616\wiring_digital.c

```c
uint8_t pin_gpio[] = {11, 12, 14, 15, 16, 17, 18, 21, 22, 23, 24, 25, 26, 28, 29, 30, 31, 32, 33, 34};
uint8_t pin_dac[] = {2, 3};
uint8_t pin_adc[PIN_ADC_CNT] = {0, 1, 10, 13, 19, 20, 27};
```

2. 编写点灯代码

```c
#define Blue 15

void setup()
{
    pinMode(Blue, OUTPUT);
    digitalWrite(Blue, LOW);
}

void loop()
{
    digitalWrite(Blue, HIGH);
    delay(500);
    digitalWrite(Blue, LOW);
    delay(500);
}
```

## 编译烧录运行

1. 点击 upload
2. 保持按下 IO2 再短按 EN

进入下载过程之后，可以松开 IO2

3. 等待 All success

![](images/BL618-烧录完成.png)

4. 短按 EN 运行程序

![](images/BL618-点灯.gif)