【祖传点灯】安信可Ai-M61-32S 莫哥HA点灯

[i=s] 本帖最后由 7788 于 2024-5-19 06:22 编辑 [/i]<br /> <br /> > 本帖最后由 7788 于 2024-5-11 14:12 编辑 > 本帖最后由 7788 于 2024-5-10 17:52 编辑 在论坛这么久了，终于有个活动可以让我薅个羊毛了 特别感谢安信可，感谢园长 接下来，现在跟着莫哥的脚步，搭建一个HA点灯了 本篇，先按莫哥教程搭建环境 # 安装依赖 ```c sudo apt-get install make gcc vim cmake git ninja-build -y ```  # 克隆SDK ```c git clone [https://gitee.com/Ai-Thinker-Open/AiPi-Open-Kits.git](https://gitee.com/Ai-Thinker-Open/AiPi-Open-Kits.git) ```  ## **拉取子模块** ```c cd AiPi-Open-Kits/ ``` ``` git submodule init ``` ```c git submodule update ```  ```c . update_sdk.sh . export.sh ```  ## 编译例程 ```c cd examples/blank/ make ```  例程编译完成，完成了一半了 ## 修改SDK配置文件 修改55行 COM5 改成 : /dev/ttyUSB0 修改88行 flash: 改成 : flash:build   ## make flash  日志输出，环境搭建没问题了 # 对接HomeAssistant ## 下载SDK ```c cd example ``` ```c git clone [https://gitee.com/Ai-Thinker-Open/HomeAssistant_example.git](https://gitee.com/Ai-Thinker-Open/HomeAssistant_example.git) ```  ## 拉取子模块 ```c cd HomeAssistant_example/ git submodule init git submodule update ```  ## 复制例程 ```c cp HomeAssistant_basic/ -r HomeAssistant_switch ```  ### 修改配置文件 flash_prog_cfg.ini  ### 修改wifi名称密码  ### 修改MQTT信息 莫哥帖子中没加password，记得加上  ### 应该可以make了  ### 烧录完成  ### HA显示  ### 修改代码，完成点灯 ```c #include <FreeRTOS.h> #include "task.h" #include "queue.h" #include "board.h" #include "bluetooth.h" #include "btble_lib_api.h" #include "bl616_glb.h" #include "rfparam_adapter.h" #include "bflb_mtd.h" #include "easyflash.h" #include "wifi_event.h" #include "log.h" #include "aiio_os_port.h" #include "homeAssistantMQTT.h" struct bflb_device_s* gpio;//全局变量 #define DBG_TAG "MAIN" void ha_event_cb(ha_event_t event, homeAssisatnt_device_t* ha_dev) { switch (event) { case HA_EVENT_MQTT_CONNECED: LOG_I("<<<<<<<<<< HA_EVENT_MQTT_CONNECED"); //一定要加static static ha_sw_entity_t entity_sw1 = { .name = "开关1", .icon = "mdi:power", .unique_id = "switch_v1", }; homeAssistant_device_add_entity(CONFIG_HA_ENTITY_SWITCH, &entity_sw1); homeAssistant_device_send_status(HOMEASSISTANT_STATUS_ONLINE); homeAssistan_device_send_entity_state(CONFIG_HA_ENTITY_SWITCH, &entity_sw1, 0); break; case HA_EVENT_MQTT_DISCONNECT: LOG_I("<<<<<<<<<< HA_EVENT_MQTT_DISCONNECT"); break; case HA_EVENT_MQTT_COMMAND_SWITCH: if (ha_dev->entity_switch->command_switch->switch_state) { bflb_gpio_set(gpio, GPIO_PIN_15); } else bflb_gpio_reset(gpio, GPIO_PIN_15); LOG_I("<<<<<<<<<< HA_EVENT_MQTT_COMMAND_SWITCH"); // LOG_I("switch addr =%p", ha_dev->entity_switch->command_switch); LOG_I(" switch %s is %s", ha_dev->entity_switch->command_switch->name, ha_dev->entity_switch->command_switch->switch_state?"true":"flase"); int ret = homeAssistan_device_send_entity_state(CONFIG_HA_ENTITY_SWITCH, ha_dev->entity_switch->command_switch, ha_dev->entity_switch->command_switch->switch_state); if (ret!=-1)LOG_I("%s send entity suceess,state=%s", ha_dev->entity_switch->command_switch->name, ha_dev->entity_switch->command_switch->switch_state?"true":"flase"); break; default: break; } } int main(void) { board_init(); bflb_mtd_init(); easyflash_init(); // aiio_log_init(); gpio = bflb_device_get_by_name("gpio"); bflb_gpio_init(gpio, GPIO_PIN_15, GPIO_OUTPUT | GPIO_PULLUP | GPIO_SMT_EN | GPIO_DRV_0); bflb_gpio_reset(gpio, GPIO_PIN_15); if (0 != rfparam_init(0, NULL, 0)) { LOG_E("PHY RF init failed!\r\n"); return 0; } staWiFiInit(); // homeassistant_blufi_init(); static homeAssisatnt_device_t ha_device; ha_device.mqtt_info.mqtt_clientID="Ai-M6X_Kit_Switch"; ha_device.mqtt_info.mqtt_host=""; ha_device.mqtt_info.port=1883; ha_device.mqtt_info.mqtt_username=""; ha_device.mqtt_info.mqtt_password=""; ha_device.name="7788"; //设备名称 ha_device.model="anxinke";//模块名称 ha_device.manufacturer="anxinke_moge";//产商名称 homeAssistant_device_init(&ha_device, ha_event_cb); vTaskStartScheduler(); while (1) { LOG_F("HomeAssistant free heap size=%d", aiio_os_get_free_heap_size()); vTaskDelay(pdMS_TO_TICKS(3000)); } } ``` # 效果图 

登录/注册后可看大图

它是什么软件？电脑上的吗？

                               
登录/注册后可看大图

这个控制灯的是什么软件？

赞

厉害了

大佬啊

赞一下

莫哥那帖子看着好麻烦

会在一个帖子的

都对HA感兴趣